Hover over the trailer
Hover your mouse over the “hot spots” on the image above to see whats so special about our step frame trailers.
Andover Trailers’ range of forklift trailers have set the industry standard, and are used by dozens of materials handling equipment manufacturers and distributors to safely transport even the highest mast machines.
Depending on the machines you need to transport, our forklift trailers can be built as either of two distinct types:
- Low step frame trailer
- Ultra-low floor wheelbox trailer with independent air suspension
Both types offer full width single piece or power-toe ramps to guarantee a shallow loading angle for even the lowest ground clearance machines, as well as a host of load securing points to ensure safety on the road. Access to the neck is even possible on step frame versions with a lifting floor.
All can be built as open trailers or bodied using TSE’s all-steel sliding roof system, known for its sheer strength and durability, which allows trailers to withstand buffeting when travelling with the roof open. Curtain side or GRP bodies are both possible to suit your requirements.
| Model Step Frame | Model Wheel Box | Axles | Gross Trailer Weight* | Approx Payload* |
| SFCL32 | FKWB32 | 2 | 32t | 26t |
| SFCL36 | FKWB36 | 3 | 36t | 29t |
* Dependent on specification
TRAILER OPTIONS
To fully tailor your trailer to your application, a wide range of options are available. Some examples are shown below, although the range is almost limitless.
Our level of standard equipment often includes items that are an optional extra elsewhere.
- Lifting and steering axles
- Disc or drum brakes
- Open deck, Curtainside or Rigid bodes
- Sliding or fixed roof
- Swinging rear body pillars to allow over-width machinery to be loaded
- Winches – electric or hydraulic
- Toolboxes, lockers, chain trays and additional storage
- Wide load marker boards & beacons
- Working at height systems
